Request a callback

+44 (0) 1794 512 419

info@dasicinter.com

Exterior Cleaning Products

Ultrakleen A500

A superior commercial vehicle cleaner, this premium quality, high foaming biodegradable formulation is especially effective on heavy duty traffic film removal.

More details

Premium quality, high foaming, heavy duty traffic film remover

Ultrakleen A500 is the most recent traffic film remover product from our Romsey laboratory. It has been developed as a concentrated formulation which when diluted will foam readily and cling well to vertical surfaces by means of its residual viscosity. The product has been designed to produce superior cleaning both on every day traffic soiling and also has the versatility and strength to effectively clean the chassis areas of commercial vehicles where a single product is required for both applications.

Ultrakleen A500 is low in alkalinity and is, therefore, completely safe for use on paintwork when used as directed.

 

  • Concentrated formulation
  • Readily foaming
  • Clings to vertical surfaces
  • Low alkalinity
  • Does not contain alkyl phenol ethoxylates
  • Biodegradable surfactants

DIRECTIONS FOR USE

Ultrakleen A500 may be used in conjunction with any equipment, spray pressure or brush. The recommended dilution rate will be up to 200:1 with water depending upon the application. Spray on the surface, allow up to two minutes dwell/soak time and then rinse off with water under pressure. When applied by hand, always work from the bottom upwards to avoid any possibility of streaking.

PACKAGING
25 litres, 200 litres, 1000 litres and bulk.

HEALTH and SAFETY INSTRUCTIONS
Always consult the product label and Dasic Safety Data Sheet before use.

Traffikleen A290

Perfect for everyday vehicle soiling, this multi-purpose, biodegradable and economical traffic film remover can be used by hand or in automatic brush or spray machine applications.

More details

Multi-purpose economical traffic film remover

Traffikleen A290 has been developed by our Romsey Research and Development facility to provide the ecologically conscious European Transport industry with a single high efficiency traffic film remover, suitable for use in both automatic brush and spray machines and also for hand application.

 

  • Concentrated formulation
  • Economical and easy to use
  • Effective in hard water
  • Multi-purpose brush/spray
  • Does not contain alkyl phenol ethoxylates
  • Biodegradable surfactants

DIRECTIONS FOR USE

Traffikleen A290 has been specially formulated for a wide variety of commercial vehicle cleaning applications:

For automatic machines.
Spray Always refer to the machine manufacturer's instructions.
Jet and spray wash machines normally operate at a concentration of
1 part Traffikleen A290 to 200 parts water.

Brush always refer to machine manufacturer's instructions.
Up and over or vertical brush washing machines normally operate at
1 part Traffikleen A290 to 200 parts water.

For hand application Recommended use of Traffikleen A290 at a concentration of 1 part product
to 50 parts water (half a cup per gallon).

Traffikleen A290 is effective at lower concentrations where only light soiling is present.

PACKAGING
25 litres, 200 litres, 1000 litres and bulk.

HEALTH and SAFETY INSTRUCTIONS
Always consult the product label and Dasic Safety Data Sheet before use.

Wash and Wax

A high quality biodegradable wash and wax concentrate that leaves a high gloss finish on all types of commercial vehicle, while being water repellant and protecting paint work.

More details

High quality wash and wax concentrate

Wash and Wax has been specifically developed to clean all types of commercial and public transport vehicles leaving them with a high gloss finish.

The product is water repellent, providing a high standard of protection to paintwork.

  • Concentrated formulation
  • Cleans and polishes in one application
  • Protects paintwork
  • Enhances vehicles= appearance
  • Low alkalinity
  • Does not contain alkyl phenol ethoxylates
  • Biodegradable surfactants

DIRECTIONS FOR USE:
 
Wash and Wax may be used in conjunction with any equipment, spray pressure or brush.  The
recommended dilution rate is up to 50:1 with water depending upon the application.
 
Spray on the surface, allow up to two minutes dwell/soak time and then rinse off with water under
pressure.  When applied by hand, always work from the bottom upwards to avoid any possibility of
streaking.
 
 PACKAGING:
 
25 litres, 200 litres, 1000 litres and bulk.
                                    
 
HEALTH and SAFETY INSTRUCTIONS:
 
Always consult the product label and Dasic Safety Data Sheet.
 
03/01/wash and wax/af

Sparkal

Multi-purpose, controlled foam, biodegradable liquid cleaner for fast and effective removal of traffic film from commercial and public transport vehicles.

More details

Multi-purpose, controlled foam liquid cleaner

Sparkal is a specially formulated liquid cleaner for effective brushless removal of traffic film from commercial and public transport.
Its unique biodegradable formula provides both water scale control and controlled foaming to give excellent cleaning results when used in conjunction with drive-through vehicle washers and high pressure washing equipment. Its appearance is a pale yellow clear liquid.

 

  • Multi-use
  • Controlled foam
  • Heavy duty
  • Concentrate
  • Biodegradable surfactants

DIRECTIONS FOR USE:

Sparkal may be used in conjunction with any equipment, pressure or brush. The recommended dilution rate will be up to 200:1 with water depending upon the application. Spray on the surface, allow up to two minutes dwell/soak time and then rinse off with water under pressure. When applied by hand, always work from the bottom upwards to avoid any possibility of streaking.

PACKAGING:
25 litres, 200 litres and bulk.

HEALTH and SAFETY INSTRUCTIONS:
Always consult the product label and Dasic Safety Data Sheet before use.

Super Trailblazer

High quality, biodegradable heavy duty traffic film remover formulated for cleaning commercial and public transport vehicles

More details

High quality, heavy duty traffic film remover

Super Trailblazer is an extremely cost-effective liquid cleaner, specially formulated to remove traffic film from commercial and public transport vehicles.

Super Trailblazer’s unique biodegradable formula, provides both water scale control and controlled foaming to give excellent cleaning results when used in conjunction with drive-through vehicle washers and high pressure washing equipment. Its appearance is a clear blue liquid with a faint lemon scent.

Super Trailblazer is low in alkalinity and is, therefore, safe on paintwork when used as directed.

 

  • Concentrated formulation
  • Cost effective
  • Foam control
  • Low alkalinity
  • Hard or soft water
  • Does not contain alkyl phenol ethoxylates
  • Biodegradable surfactants

DIRECTIONS FOR USE

Super Trailblazer may be used in conjunction with any equipment, spray pressure or brush. The recommended dilution rate will be up to 200:1 with water depending upon the application. Spray on the surface, allow up to two minutes dwell/soak time and then rinse off with water under pressure. When applied by hand, always work from the bottom upwards to avoid any possibility of streaking.

PACKAGING
25 litres, 200 litres, 1000 litres and bulk.

HEALTH and SAFETY INSTRUCTIONS
Always consult the product label and Dasic Safety Data Sheet before use.

Curtkleen

A specialised, concentrated and biodegradable vinyl cleaning solution for removing traffic film and heavy grime from curtain-sided trailers.

More details

Specialised concentrated vinyl cleaner

Curtkleen is a specialised alkaline detergent for removing traffic film and heavy grime from curtain-sided trailers.

Curtkleen is also capable of removing stains (e.g. nicotine) and soiling from a variety of surfaces such as ventilation ducting and especially vinyl and other polymeric coatings.

Curtkleen is a biodegradable, alkaline water based product. It is pleasantly perfumed, ensuring favourable working conditions for the operator.

 

  • Use on all vinyl surfaces
  • Machine or hand
  • Water-based
  • Concentrated formulation
  • Pleasant perfume
  • Biodegradable surfactants

DIRECTIONS FOR USE

Curtkleen should be diluted up to 15:1 with warm or cold water before use. A pressure washer may be used for application and rinsing. Where light soiling is encountered, the pressure itself may be sufficient, otherwise a light brushing may be needed.

PACKAGING
25 litres, 200 litres, 1000 litres and bulk.

HEALTH and SAFETY INSTRUCTIONS
Always consult the product label and Dasic Safety Data Sheet before use.

Chassiskleen

For the safe and efficient removal of oil, grease and road soils from commercial vehicles' chassis, undergear and engines this biodegradable, solvent free, cleaning formulation is unbeatable.

More details

Solvent free, heavy duty cleaner

Chassiskleen is a specially formulated detergent for the safe and efficient removal of oil, grease and road soil from commercial vehicles chassis, undergear and engines. Chassiskleen gives superlative results in conjunction with hot pressure wash equipment. Metal parts are restored to "new".

Chassiskleen is also recommended for the removal of oils and grease from concrete workshop and garage floors.

Chassiskleen is a biodegradable, slightly alkaline water based product which is non-polluting and does not give off dangerous vapours. It is, therefore, extremely useful in cleaning in areas where odour bearing and inflammable solvent type cleaners are unacceptable.

 

  • Economical to use
  • Concentrated formulation
  • Effective removal of oil and grease
  • Biodegradable surfactants

DIRECTIONS FOR USE:

Chassiskleen is best used in conjunction with pressure spray equipment where the dilution is automatic. It is recommended that for normal use the dilution of product is between 1:100 and 1:300 in water, depending on the degree of soiling being removed. For areas of heavy soiling, the product may be used at stronger concentrations. A dilution rate of 1:10 is usually sufficient where extremely heavy soiling is present.

PACKAGING:
25 litres, 200 litres, 1000 litres and bulk.

HEALTH and SAFETY INSTRUCTIONS:
Always consult the product label and Dasic Safety Data Sheet before use.

Creet

An inhibited acidic descaler and deruster which has been specially formulated to rapidly remove carbonate scale, iron oxide deposits, cement and limestone from plant and equipment.

More details

Descaler/Deruster

Creet is an inhibited hydrochloric acid based material incorporating effective corrosion inhibitors. It has been specifically formulated for the rapid removal of carbonate scale and iron oxide deposits found in boilers, heat exchangers and sea water evaporators for the effective removal of cement and limestone from plant and equipment. It should not be used in systems containing galvanised steel, magnesium alloys and aluminium alloys.

• Fast acting
• Easy to use
• Can be diluted with water
• Removes limescale and rust
• Improved heat exchange efficiency
• Non-flammable
• Stable at normal temperatures

DIRECTIONS FOR USE

May be applied by hand using a soft brush, by acid resistant non-misting hand sprayer or by tank immersion. Dilution will depend on the extend of scaling or rusting but is usually between 1:42 and 1:12.

Action may be speeded up by raising the temperature or the solution, but must never exceed 50°C in order to avoid breakdown of the corrosion inhibitor.

HEALTH and SAFETY INFORMATION
Always consult the product label and Dasic Safety Data Sheet before use.

PACK SIZES
4 x 5 litres and 25 litres.

Bitumex

An easy to use spot treatment for cleaning tar deposits from vehicle paint work.

More details

Spot remover for removing tar deposits from vehicle paintworks

Bitumex is an efficient cleaner, specially developed for removing bitumen and tar residues.

Bitumex is non-caustic and can safely be used on painted surfaces without risk.

Bitumex rapidly dissolves away the tar from the soiled surface which can then be rinsed clean with fresh water.

  • Rapid solubiliser for tar and bitumen
  • Non-caustic
  • Water rinsable
  • Biodegradable surfactants

DIRECTIONS FOR USE
 
Bitumex may be applied by spraying, brushing, dipping or using a low pressure applicator to
the contaminated surface.  Allow approximately 1-2 minutesthe degree of soiling) before rinsing clean with a water jet.

PACKAGING
 
25 litre and 200 litre drums.
 
HEALTH and SAFETY INSTRUCTIONS
 
Always consult the product label and Dasic Safety Data Sheet before use.
 
03/01/bitumex/af

Lacqsolv

Formulated to easily remove the non-wax type protective coatings from the exterior of new cars and trucks.

More details

Remover for non-wax type protective coatings from the exterior of new cars, vans and trucks
Lacqsolv is a specially formulated aqueous based cleaner for effective removal of protective coatings applied to new cars before despatch to customer. These are increasingly being used in preference to normal wax.

 

  • Fast and effective
  • Non-flammable, CFC free
  • Cost effective water dilutable product
  • Biodegradable surfactants

DIRECTIONS FOR USE

Apply a solution diluted with up to 5 parts of water to all coated surfaces.

Allow a few minutes for the coating to soften the touch.

The softened coating should then be rinsed off with a high pressure water jet, using hot water if available.

PACKAGING

25 litre and 200 litre drums.

HEALTH and SAFETY INSTRUCTIONS
Always consult the product label and Dasic Safety Data Sheet before use.

Aerokleen AN2001P Polish

A high gloss and easily applied liquid polish, which was originally developed for the aircraft industry Aerokleen has proven extremely effective on car finishes.

More details

Water dilutable liquid wipe on/wipe off polish

 

  • Contains no aromatic solvents for extra safety
  • Formulated to wax and polish
  • Safe on all painted aircraft surfaces
  • Safe on all aircraft metals
  • Easily applied
  • Easily removed without excessive rubbing
  • May be applied as a cleaner/polish
  • May be used with all wax applicators
  • Protects aircraft surfaces
  • Conforms to Specification CSD-1 and AMS 1650 A.
  • Water dilutable for economy and faster removal

Aerokleen Polish AN2001P has been developed to complement the existing range of Aerokleen fuselage washing products. Aerokleen Polish AN2001P provides the ideal solution to aircraft cleaning requirements during regular mechanical maintenance periods.


Aerokleen Polish AN2001P may be easily applied on both painted and unpainted surfaces providing protection against oxidisation and ultra-violet light. The product readily removes surface film, oxidised paint and exhaust residues. It is, therefore, an ideal product for use when restrictions are placed upon the use of water required for conventional cleaning. The restoration of lustre to old paintwork using Aerokleen Polish AN2001P provides both job satisfaction and passenger appeal.

APPLICATIONS

Apply Aerokleen AN2001P to the aircraft surface with a suitable applicator. The polish is then allowed to dry to an infinite haze and wipe off with a clean cloth or towel. The polish may be used with a mechanical buffer, if desired.

Aerokleen AN2001P Polish may also be applied at dilutions of between 10 and 50% in water, through spray equipment or by hand. Use of diluted product is recommended where ease of removal on large areas is of major importance.

Aerokleen Polish AN2001P may be used via robotic aircraft washing units at concentrations as low as 1% with water.

Aerokleen Polish AN2001P may also be used to dry clean and polish an aircraft within the hangar, during scheduled engineering overhaul periods.

PACKAGING
4 x 5 litre packs

HEALTH and SAFETY INFORMATION
Always consult the product label and Dasic Safety Data Sheet before use.

Glasskleen

This ready to use, non-smearing glass and perspex cleaner gives rapid crystal clear results on all glass surfaces, including double glazing, windscreens and mirrors.

More details

Ready to use, non-smearing glass and perspex cleaner

Glass-Kleen is fast, economic, effective and simple to use leaving a smear-free crystal clear surface.

Glass-Kleen may be used on all forms of glass, including double-glazing and windscreens.

Glass-Kleen also effectively cleans chrome, stainless steel and laminated surfaces.

 

  • Easy and ready to use
  • Spray on/wipe off formulation
  • Crystal clear results
  • Does not smear
  • Pleasant scent
  • Also cleans perspex and mirrors
  • Biodegradable surfactants

DIRECTIONS FOR USE

Apply with a Dasic EQ trigger pressure sprayer. Mist on to the surface with a slow-sweeping motion. Wipe dry with a clean tissue or lint-free cloth.

PACKAGING
4 x 5 litres, 25 litres, 200 litre drums and bulk.

HEALTH and SAFETY INFORMATION
Always consult the product label and Dasic Safety Data Sheet before use.

Quick Contact